The fruit pulper can make juice from vegetables and fruits, separating fruit kernels, seeds, and thin skin. It can be divided into single-pass fruit pulper and double-pass fruit pulper. The raw materials are fruits such as orange, grapes, kiwi, mulberry, bayberry, peach, etc., or vegetables including celery, tomatoes, and peppers. The processed fruits or vegetables are nutritious and in line with the standards of healthy living of modern people.
Single-pass fruit pulper
The single-pass fruit juicer machine is mainly composed of the cylindrical screen, crushing blade, scraper, shaft, frame, and transmission system. The cylindrical screen is to separate slag and juice wit the hole size of 4-1.5mm, and it is made of stainless steel. There are two rectangular scrapers inside the machine to beat the fruits during operation. The distance between the scraper and the inner wall of the cylindrical screen is adjustable, which is achieved by changing the bolts. You shall install a non-toxic acid-resistant rubber plate on the scraper to prevent the cylindrical screen from being broken by the scraper.
The working principle of Single-pass fruit pulping machine
The operator puts the raw materials into the hopper, and the motor drives the scraper to rotate constantly. The fruit or vegetable moves in a spiral trajectory between scraper and the screen. Due to the centrifugal force, the juice and fruit pulp flow out from the holes of the cylindrical screen. Meanwhile, the seeds and fruit skin are discharged from the slag outlet on the left of the cylindrical screen.
The technical parameter
Double-pass fruit pulper
The double-pass fruit juicer is suitable for the separation of pulp and skin of fruits and vegetables after being crushed and pre-cooked. It is composed of two single-pass fruit pulper in series, and bears upper and lower structure. The first pass is coarse pulping and the second pass is fine pulping. Besides, the size of the screen can be customized according to customer requirements.
What is the difference between the fruit pulping machine and the screw juicer?
You may be confused that what is the difference between fruit pulper and screw juicer, since both machines can process the fruit and vegetables, getting the juice finally. However, there are some differences between them.
First, the inner structure is different. Fruit pulper has several long blades inside machine, and the fruit and vegetables are constantly beaten by the blades and you can taste some pulp. The screw juicer matches with single-screw or double-screw structure that squeeze the fruits in order to get the juice.
Second, the final effect is different. The fruit processed by the pulper machine is thicker than the fruit treated by the screw juicer.
Which factors can affect the pulping effect of fruit pulper ?
- The nature of the fruits and vegetables themselves.
- The diameter of the screen hole: 0.4 ~ 1.5mm, the screen hole can be changed according to different raw materials.
- The percentage towards the total area of sieve holes in a total area of screen drum: 50%
- lead angle.
- The gap between blades and inner drum: 1 ～ 4mm.
- The speed of shaft.
Why should you adjust the speed of raw material in the drum?
The faster the shaft rotates, the faster the raw material move. In this way, the lead angle is large with less pulping time, as a result, the moving speed is fast. It is convenient to adjust the lead angle and the change of lead angle has a great influence on the material moving speed.
- you shall add the raw material evenly, and check the specific situation of slag and slurry at any time. If the pulping effect is not good, you can properly adjust the spiral angle of the scraper and the gap between the scraper and the screen after stopping.
- When finishing, clean the filter with water and brush.
5 sets fruit pulper delivery news
We sold 5 sets fruit pulper to Ghana last week. This customer runs a fruit shop, buying 5 sets machines for his friends and him. All machines have be packed well and are ready to deliver.Last Updated on