This grain mill is mainly used to grind grain into fine powder, and it also applies to pharmaceutical, chemical, agricultural and food industries to crush dry and brittle raw materials, so it has wide application.The machine has a cross hammer, fluted disc, hinge, handle and stainless steel screen, which enables it bears high milling effect. Grain mill machine has a simple structure, stable operation, low noise and good smashing effect. The fineness of powder can be achieved by using different aperture screens. Importantly, the final powder is very fine, and it is favored by all of our customers.
Description of the important parts of grain mill
- Fixed fluted disc: fixed on the cover and there is a bigger fixed fluted disc.
- Activefluted disc: There are beat teeth, main crushing teeth, and grinding teeth.
- Screen: you can choose a proper screen according to the requirements of the finished product size (fineness).
- Switch and rotation direction: green -on red – off
Technical parameter of grain mill
Advantage of grain mill
- Wide application. The grain mill is suitable for corn, beans, wheat, and chili, Chinese yam, etc.
- The screen can be changed according to your needs.
- The final powder is very fine and can be eaten by people.
- The corn milling machine is easy to operate and maintain.
- Stainless steel enables machine to bear long service life.
Working principle of grain mill
After the material enters the grinding the corn machine，the high-speed movable fluted disc and the fixed fluted disc are moving relative to each other. The material is continuously impacted, rubbed and collided with each other, and finally crushed into powder. The powder is directly discharged from the crushing chamber.
How to install and maintain grain mill machine?
- Before starting the wheat grinding machine, you must check whether the door is closed, then tighten the handwheel and the positioning bolt.
- Connect the water cooling device to ensure sufficient water supply.
- When installing, turn on the power and check whether the motor rotation direction is as same as the direction of the arrow. If not, adjust Motor junction box
- When the motor rotates in the correct direction, you shall idle the machine for several minutes and regularly add lubrication oil.
- You shall place the raw material slowly and evenly, and do not put too much one time. Pay attention to whether the current is overloaded to prevent damage to the wheat grinding machine.
- If there are any serious vibrations and noises during operation, it is necessary to shut down and check in time.
- Keep the parts lubricated and clean all the time.
The FAQ of grain mill
- what is the raw material of grain mill?
yam. It can grind grain such as corn, beans, wheat, and chili, Chinese yam etc.
- What is the capacity of the machine?
We have different models with different capacities, and you can choose it according to your need.
- How about the thickness of the finished product?
Generally at 20-40 fineness.
- What is the material of the machine?
304 stainless steel
- What is the voltage of it?
The transformer can be replaced according to the local voltage requirements of the customer.
- Can I pay by credit card?
You can pay by credit card through the Alibaba platform.